Fuel contamination is nothing new, all owners of fuel storage tanks or petrol stations know how important is to remove water and impurities from the tank, that can cause problems to vehicles and machinery.

We discussed the importance of filters in the article Importance of particle and water filter on storage tanks

In this article we will discuss how you can identify if your fuel is contaminated and what you can do to fix the problem.

Therefore, water can appear in the tank due to condensation, the small water content is deposited on the bottom of the tank. Impurities in the fuel can come through vent manholes or from the inside walls of the tank.

The area between the water and the fuel is perfect for microbial growth and the formation of what we call Diesel Bug/Sludge.


If not treated in time, the Sludge layer builds up and turns into a rather nasty residue, which is pumped along with the fuel through distribution equipment and can cause damage to pumps, filters, damage to vehicles that are being fuelled, resulting in loss of  time and money.

Since this is a major problem, it is necessary for every fuel storage tank owner to check the condition of the fuel regularly, to take the necessary measures if it is contaminated.


Returning to the subject of the article, how do we know if fuel from the storage tank is contaminated?


1. Fuel aspect

The first step is to check the appearance of the fuel by taking a sample from the tank in a transparent container. When checking the appearance of the fuel, it is best to take a sample from the bottom of the tank as well as from the top, as this is where the sludge layer, diesel bug, forms.

If the fuel is clear, you can see through it, then it's fine.

If it is cloudy, then there is water contamination. If the water in a tank emulsifies under the pressure and use of the tank, water droplets will form, giving the fuel a slightly cloudy or even milky appearance.


If the water is not removed from the tank,  nasty microbial residue / diesel bug develops and clogs filters and damages vehicles.

To remove water from the tank there are several options, absorbent, filters which we have discussed in the article Importance of particle and water filter on storage tanks


2. Filters and equipment problems

When the flow at the pump is weaker than usual, you should check the filters. Low flow means that the filters are full of water or particles that have been trapped while using the pump.

Filters are consumable parts, so they need to be changed often.


3. Traces of corrosion on the tank

If water and residues are not removed, there may be traces of corrosion on the tank.

It's a good idea to set up a schedule of tank checks to discover any cracks and leaks early.

A rust spot on a tank can spread quickly and the tank structure can be compromised.


For aboveground tanks, fitted with a retention sump, any leaks can be detected in time if they are periodically cleaned.

For double-walled aboveground tanks it is mandatory, in addition to visual inspections, to have leak detection and alarm systems in place.

In the case of underground tanks it is important that are covered with a protective layer made of resinous paints and even fibreglass, in order to withstand underground conditions as well as possible.


What can you do if you discover tank anomalies and find that the fuel inside is contaminated?


Always have at least one spare water/particulate filter so that you can change it quickly if you find that the flow has dropped. If a new filter doesn't solve the flow problem, then contact the service team.

If the contamination is bad, then do NOT fill it with a new batch of fuel on top of the old, contaminated one.

Check and clean the equipment that transfers the fuel from the cistern into the storage tank.

Call the service team to check the integrity of the equipment fitted to the tank and its condition.


If you don't use the fuel storage tank regularly, then the risk of diesel sludge residue is higher, so you can install a fuel recirculation system, which pulls the fuel through one side, passes it through a filtration system then transfers the fuel back into the tank.

It's an expensive solution that few companies can affordit , but it's good to know that such solutions exist.


Whatever questions you have, contact us and talk to our colleagues about Eurial's fuel dispensing equipment, service and maintenance.