HLS 6010 level probe

TECHNICAL SPECIFICATIONS

Tank standard height : 1,600; 2,000; 2,500; 2,900; 3,000 mm.

Product measurement: Accuracy: ± 0.04 mm

                                          Repeatability: ± 0.1 mm

                                          Minimum measuring limit 23 mm from the base

Water presence detection and measurement:

Accuracy: ± 0.1 mm. Minimum measuring limit 23 mm from the base.

Temperature measurement

Accuracy: ± 0.1 ° C

IP68 Probe Protection

Protection ANTIEX II ½ G Ex to II B T4 Ga / Gb

Probe electrical circuit Intrinsic safety - Can operate in Zone 0

Lightning protection, thunder electronically protected and is integrated in the system and external overloads, probe supply.

Mounting Threaded connection with adjustable height.

Standard thread 1 ½ ”

Optional NTP 1 ½ ”thread

Materials in direct contact with the product: stainless steel 14301, teflon, viton (synthetic rubber)

Standard working pressure: 1.5 bar and for LPG 25 bar.

Working temperature: -25 ° C to + 60 ° C for the environment

                                         -25 ° C to + 100 ° C for the measured liquid. In zone Ex (zone 0) temp. liquid max. 60 ° C

Wired power supply, direct from Optilevel Supply

Communication protocol: standard HLS protocol, optional H protocol. Controllers are used for other protocols.

Certificates and Approvals ATEX, IECEx, KVU and other local standards

Recommended for diesel, petrol, CLU, LPG, urea-based additive, water

Data transmission Shielded cable: 3 x 0.75 mm for max. 250 m. For longer distances or locations where not can mount cables there is WIRELESS solution

It is important to know the level of fuel in the tank to ensure business continuity without interruption and to avoid placing fuel orders that will not fit in the tank.

Read about the level sensors are on the market în the blog article: The optimal way of measuring your fuel level: HLS 6010 Hectronic